四川盆地震旦系灯影组葡萄状白云岩成因   总被引：1，自引：1，他引：0       下载免费PDF全文

张杰  Brian Jones  潘立银  周进高  秦玉娟  郝毅  武明德 《古地理学报》2014,16(5):715-725

四川盆地震旦系灯影组发育巨厚的白云岩,其中灯影组二段和四段发育大量具有各种形态的葡萄状白云岩,其直径最长可达75cm,有的平行于层面,有的穿层。剖面资料表明,葡萄状白云岩发育多期等厚环边胶结物,中部残留大量未充填的不规则洞穴,这成为与岩溶喀斯特作用相关的地下溶蚀作用的证据。围岩泥晶白云石为早期海水中原生结晶的产物,后来的胶结物可划分为4期: (1)自泥晶化白云石(部分样品中可见)作为最早的一期胶结物,由于各种生物化学作用和生物作用的影响而紧贴着围岩发育;(2)第2期胶结物纤维状白云石可能为海水中直接沉淀的产物,经历后期成岩作用后,具有完全有序的结构,晶胞参数接近理想值;(3)细—中晶白云石为第3期胶结物,包含纤维状白云石溶蚀残余,形成于构造抬升之后的近地表大气淡水环境;(4)第4期胶结物中—粗晶白云石为埋藏环境下直接结晶的产物,充填了孔洞中心,残留部分未充填孔洞。灯影组受到了岩溶喀斯特作用、胶结作用以及白云石化作用等成岩作用的影响,其中与葡萄状白云岩有关的岩溶喀斯特作用对于灯影组储集层的发育至关重要。对灯影组葡萄状白云岩的研究,不仅有助于深入探讨灯影组储集层成因和演化及灯影组白云岩的成因,而且有助于指导四川盆地前寒武系油气勘探。  相似文献   

Carbon and oxygen isotopic composition of car- bonate cements of different phases in terrigenous siliciclastic reservoirs and significance for their origin： A case study from sandstones of the Triassic Yanchang Formation, southwestern Ordos Basin, China     

Qi Wang  Xizhun Zhuo  Guojun Chen  Xiaoyan Li 《中国地球化学学报》2008,27(3):249-256

Early carbonate cements in the Yanchang Formation sandstones are composed mainly of calcite with relatively heavier carbon isotope （their δ^18O values range from -0.3‰- -0.1‰） and lighter oxygen isotope （their δ^18O values range from -22.1‰- -19.5‰）. Generally, they are closely related to the direct precipitation of oversaturated calcium carbonate from alkaline lake water. This kind of cementation plays an important role in enhancing the anti-compaction ability of sandstones, preserving intragranular volume and providing the mass basis for later disso- lution caused by acidic fluid flow to produce secondary porosity. Ferriferous calcites are characterized by relatively light carbon isotope with δ^13C values ranging from -8.02‰ to -3.23‰, and lighter oxygen isotope with δ^18O values ranging from -22.9‰ to -19.7‰, which is obviously related to the decarboxylation of organic matter during the late period of early diagenesis to the early period of late diagenesis. As the mid-late diagenetic products, ferriferous cal- cites in the study area are considered as the characteristic authigenic minerals for indicating large-scaled hydrocarbon influx and migration within the clastic reservoir. The late ankerite is relatively heavy in carbon isotope with δ^13C values ranging from -1.92‰ to -0.84‰, and shows a wide range of variations in oxygen isotopic composition, with δ^18O values ranging from -20.5‰ to -12.6‰. They are believed to have nothing to do with decarboxylation, but the previously formed marine carbonate rock fragments may serve as the chief carbon source for their precipitation, and the alkaline diagenetic environment at the mid-late stage would promote this process.  相似文献   

西藏扎布耶盐田盐渍土的改性配比试验   总被引：1，自引：0，他引：1  

李长洪  张吉良  林清华  张永生  方雪松 《吉林大学学报(地球科学版)》2008,38(2):273-278

根据盐渍土的物理化学性质,采用掺入不同比例石灰或水泥的方法进行改性处理。经击实、抗剪和抗压强度试验结果表明,盐渍土掺入石灰或水泥改性后,混合料的最大干密度、最优含水率、强度指标等均有增加,特别是内聚力迅速增长。研究表明,盐渍土混合料的性状得到了明显改善,改性后的混合料可用于修建盐田埝堤类相关工程。  相似文献   

新型抗水氯氧镁水泥防渗渠在自然环境的水化产物、相转变规律及其对强度的影响          下载免费PDF全文

石天阳  余红发  麻海燕  李颖 《盐湖研究》2021,29(3):38-46, 55

氯氧镁水泥(Magnesium oxychloride cement, MOC)具有快凝、早强、高强、防火和不腐蚀玻璃纤维等优点,非常适合于制作玻璃纤维增强薄壁制品,在农业灌溉工程中具有良好的应用前景。采用XRD和TOPAS分析了新型抗水氯氧镁水泥制成内蒙古防渗渠的物相组成,探讨了氯氧镁水泥制品在自然环境的水化产物与相转变规律、以及相组成对强度的影响。结果表明,在水分缺少的条件下,氯氧镁水泥的水化产物主要为5Mg(OH)_2·MgCl_2·8H_2O(5·1·8)和Mg(OH)_2;在水分充足的条件下,水化产物主要为Mg(OH)_2和5·1·8,碳化产物为碳化氯氧化镁Mg(OH)_2·MgCl_2·2MgCO_3·6H_2O(1·1·2·6)和水菱镁矿4MgCO_3·Mg(OH)_2·4H_2O(4·1·4)。水化产物对强度有促进作用,而碳化产物会降低强度。通过10年的工程环境考验,证明新型氯氧镁水泥制品在环境中能够保持主要强度相5·1·8的稳定性,具有良好的长期力学性能。  相似文献   

Stabilisation/solidification and bioaugmentation treatment of petroleum drill cuttings     

《Applied Geochemistry》2016

Petroleum drill cuttings are usually treated by techniques suitable for particular contaminant groups. The significance of this study consists in the development of a treatment technology that can simultaneously handle the hydrocarbon and metal constituents of drill cuttings. Bioaugmentation is combined with stabilisation/solidification (S/S), within S/S monoliths and in granulated S/S monoliths. Portland cement was used for S/S treatment at 30% binder dosage. Bioaugmentation treatment involved two bacterial densities of a mixed culture bio-preparation. The effects of inclusion of compost, fertiliser and activated carbon were also evaluated. After 28 days, the combined S/S and bioaugmentation treatments recorded up to 15% higher total petroleum hydrocarbon (TPH) loss than control S/S treatment without bioaugmentation. Embedding fertiliser, activated carbon and higher bacterial density within S/S monoliths resulted in the highest (99%) TPH reduction but higher concentrations of metals. The addition of compost and lower bacterial density to granulated S/S monoliths led to similar (98%) TPH degradation and lower amounts of metals. The results suggest that with better mixture optimisation, combining S/S and bioaugmentation could engender more sustainable treatment of drill cuttings.  相似文献   

Diagenesis and origin of calcite cement in the Flemish Pass Basin sandstone reservoir (Upper Jurassic): Implications for porosity development     

《Marine and Petroleum Geology》2016

The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q_86.0F_3.1R_10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (T_h) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ¹⁸O and δ¹³C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ¹⁸O but similar δ¹³C values. The shale normalized rare earth element (REE_SN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO₂/CH₄ and N₂/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality.  相似文献   

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin     

《Marine and Petroleum Geology》2016

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.  相似文献   

Free allocation in the 3rd EU ETS period: assessing two manufacturing sectors     

Christian Stenqvist  Max Åhman 《Climate Policy》2016,16(2):125-144

This article provides an analysis of the EU Emissions Trading Scheme (ETS) and the harmonized benchmark-based allocation procedures by comparing two energy-intensive sectors with activities in three Member States. These sectors include the cement industry (CEI) and the pulp and paper industry (PPI) in the UK, Sweden, and France. Our results show that the new procedures are better suited for the more homogeneous CEI, in which the outcome of stricter allocation of emissions allowances is consistent between Member States. For the more heterogeneous PPI – in terms of its product portfolios, technical infrastructures, and fuel mixes – the allocation procedures lead to diverse outcomes. It is the lack of product benchmark curves, and the alternative use of benchmark values that are biased towards a fossil fuel-mix and are based on specific energy use rather than emission intensity, which leads to allocations to the PPI that do not represent the average performance of the top 10% of GHG-efficient installations. Another matter is that grandfathering is still present via the historically based production volumes. How to deal with structural change and provisions regarding capacity reductions and partial cessation is an issue that is highly relevant for the PPI but less so for the CEI.

Policy relevance

After an unprecedented amount of consultation with industrial associations and other stakeholders, a harmonized benchmark-based allocation methodology was introduced in the third trading period of the EU ETS. Establishing a reliable and robust benchmark methodology for free allocation that shields against high direct carbon costs, is perceived as fair and politically acceptable, and still incentivizes firms to take action, is a significant challenge. This article contributes to a deeper understanding of the challenges in effectively applying harmonized rules in industrial sectors that are heterogeneous. This is essential for the debate on structural reformation of the EU ETS, and for sharing experiences with other emerging emissions trading systems in the world that also consider benchmark methodologies.  相似文献   

地下闭式循环地热交换发电系统简介     

周刚  李金锋  Helmut WOLFF  汤凤林 《地质科技情报》2006,25(4):105-108

为解决能源问题而提出了地下闭式循环地热交换发电系统.该系统地下部分通过全井下套管形成一个封闭系统,克服了传统地热发电和干热岩发电受地质条件制约、对环境造成危害等缺点,是一种新型的不依赖位置、环境友好的地热发电系统.采用大位移技术进行钻井,应用悬链线技术对井身剖面结构进行了优化,提出了地下连接技术要求,应用分支井和膨胀套管技术固井,设计了水泥配方并进行了相关试验,优化了载热流体,计算了有机工质朗肯循环(ORC)的发电效率.  相似文献   

粉煤灰制备硫铝酸钙-阿利特水泥熟料的研究     

赵宏伟  李金洪梅林刘辉  耿建刚 《岩石矿物学杂志》2006,25(6):518-522

以粉煤灰为主要原料, CaF2为矿化剂,设计MG和MS值,控制CaO和CaSO4含量,分别在1 150、1 200、1 250、1 300和1 350℃温度下烧制高胶凝性硫铝酸钙-阿利特复合矿相水泥熟料.运用X射线粉晶衍射(XRD)和扫描电镜(SEM)等手段,研究原料配方和煅烧温度对熟料物相组成的影响,对熟料物相形成的反应历程作了探讨.实验结果表明,在1-300℃,当MG=1.05、MS =0.95时,形成较理想的熟料,物相组成约为C4A3-S 58.73%,C3S 23.99%,C2S 2.87%,C11A7·CaF2/C12A7 14.07 %,f-CaO 0.35%.熟料中主要物相硫铝酸钙晶体呈菱形十二面体,发育完整,形态规则,颗粒大小约为1～3 μm;阿利特(C3S)相物相为板状六角形,晶体发育相对细小.  相似文献